PERANCANGAN SISTEM MONITORING DAN KONTROLING POMPA AIR BERBASIS ANDROID

Yan Mitha Djaksana; Kelvin Gunawan

doi:10.31598/sintechjournal.v4i2.741

Authors

Yan Mitha Djaksana STMIK Eresha
Kelvin Gunawan STMIK Eresha

DOI:

https://doi.org/10.31598/sintechjournal.v4i2.741

Keywords:

nodemcu esp8266, internet of things, blynk, sensor ultrasonik

Abstract

Water is a necessity that is so important for every creature in the world, and the estimate of water must always be available or it is in homes, offices, public places or industry. This causes the water storage tank to play an important role in ensuring the availability of air is always there and under control. In this research, it is based on an Android-based Water Pump Monitoring and Control system with the support of IoT (Internet of Things) technology so that it makes it easier for users to monitor the amount of water in the storage tank and control the water pump to fill water into the tank, the system built is supported by the NodeMCU module. esp8266, Relay and Ultrasonic Sensor and connected to the Blynk application which functions as an application interface in monitoring and controlling the water pump. If the air has determined the specified distance, a notification will appear to immediately turn off the water pump, thus it is hoped that this system can help users see the condition of the water pump and water tank even though they are not at home

Downloads

Download data is not yet available.

References

H. Suryantoro, “Prototype Sistem Monitoring Level Air Berbasis Labview dan Arduino Sebagai Sarana Pendukung Praktikum Instrumentasi Sistem Kendali,” Indones. J. Lab., vol. 1, no. 3, p. 20, 2019, doi: 10.22146/ijl.v1i3.48718.

I. Indrianto, F. Sudarto, and S. J. Novianty, “PENGONTROLAN KETINGGIAN AIR PADA BAK PENAMPUNG BERBASIS NODE MCU,” CCIT J., 2018, doi: 10.33050/ccit.v11i2.589.

I. Ma’ruf and A. Hadi, “MONITORING DAN KONTROL LEVEL AIR MENGGUNAKAN ULTRASONIK BERBASIS PC,” Semin. Nas. Ind. dan Teknol. (SNIT), Politek. Negeri Bengkalis, pp. 270–276, 2019.

M. R. Thansekhar, N. Balaji, S. Pandikumar, and R. S. Vetrivel, “Internet of Things Based Architecture of Web and Smart Home Interface Using GSM,” Int. J. Innov. Res. Sci. Eng. Technol., 2014.

S. D. T. Kelly, N. K. Suryadevara, and S. C. Mukhopadhyay, “Towards the implementation of IoT for environmental condition monitoring in homes,” IEEE Sens. J., 2013, doi: 10.1109/JSEN.2013.2263379.

A. Adiguna and D. Windu Gata, KENDALI DAN MONITORING SUHU DAN KETINGGIAN AIR AQUARIUM DENGAN SENSOR DS18B20, HCSR04 DAN MIKROKONTROLER ARDUINO UNO R3 BERBASIS WEB. 2018.

I. Gunawan, T. Akbar, and M. Giyandhi Ilham, “Prototipe Penerapan Internet Of Things (Iot) Pada Monitoring Level Air Tandon Menggunakan Nodemcu Esp8266 Dan Blynk,” Infotek J. Inform. dan Teknol., 2020, doi: 10.29408/jit.v3i1.1789.

H. L. Wiharto, “Penerapan Sensor Ultrasonik Pada Sistem Pengisian Zat Cair Dalam Tabung Silinder Berbasis Mikrokontroller ATmega 16,” JHP17 J. Has. Penelit. LPPM Untag Surabaya, 2016.

M. K. Arafat, S.Kom, “Sistem Pengamanan Pintu Rumah Berbasis Internet Of Things (Iot) Dengan Esp8266,” J. Ilm. Fak. Tek. “Technologia,” 2016.

K. Afri, “Perancangan Sistem Pengaman Pompa Air Di Dalam Sumur Berasis Plc,” Diunduh Pada 15/05/2019, 2016.

A. Alawiah and A. Rafi Al Tahtawi, “Sistem Kendali dan Pemantauan Ketinggian Air pada Tangki Berbasis Sensor Ultrasonik,” KOPERTIP J. Ilm. Manaj. Inform. dan Komput., 2017, doi: 10.32485/kopertip.v1i1.7.

E. N. Diansyah, “RANCANG BANGUN ALAT SISTEM MONITORING VOLUME DAN KEJERNIHAN AIR PADA TANGKI BERBASIS LabView DENGAN KONTROLLER NI MYRIO,” Coding J. Komput. dan Apl. Untan, 2015.

D. Maulina and A. S. Prayuda, “MONITORING DAN KONTROL POMPA AIR PADA RUMAH KABEL BAWAH TANAH,” Institut Teknologi Sepuluh Nopember Surabaya, 2015.